Xgs1935-52 - 52 Port Smart Managed Switch - 48x Gigabit Copper & 4x 10g Sfp+ Gb

Introduction

Using 10GbE Uplink Switch With Reasonable Price
With Gigabit connectivity plus four 10GbE uplinks, the XGS1935 Series is an ideal option for those who need basic functions, easier management, and a more reasonable price to upgrade their networks and ensure network efficiency for continuous business productivity.

Manage It Your Way!
The support of NebulaFlex allows you to easily switch network management modes between standalone, and our license-free Nebula cloud management platform. Nebula provides both intuitive web interface and mobile App to deliver a streamlined experience for installation and management of your network, without additional cost for a software or hardware controller.

Anytime, Anywhere with
Nebula Mobile App
- Easy device onboarding: QR code scan
- At a glance of network status
- Remote control your network
- Reboot AP, Camera by PoE power cycle
- Block clients with unusual traffic

Web-managed with advanced features
You can configure and manage advanced features like static routing, VLAN, QoS, IGMP Snooping, Link Aggregation, IPv6 and DoS prevention through an intuitive built-in Web-based browser. Moreover, the friendly step-by-step intuitive wizard helps avoiding multiple complicated configuration pages for quick set up with few clicks in the matter of minutes.

Powering more devices intelligently
The PoE models XGS1935-28HP and XGS1935-52HP are designed with compact dimensions and support PoE+ delivering 30W per port, making them ideal for dense PoE deployments. With a 375W high-power budget, they can meet the demands of power-hungry devices. Additionally, the power consumption mode improves budget efficiency for a better ROI, allowing more PD devices to be connected within the system.

Silent, and reliable operation
This Series is built with smart fan designed to automatically adjust speeds based on the device temperature, offering near silent operation and stable connection for your daily work.

Built with nature in mind
The XGS1935 series is built with a more compact chassis, reducing packaging by up to 36% and weight by up to 22% compared to the previous XGS1930 series. These efforts have resulted in a 48% increase in units per pallet and a reduced carbon footprint.

Management features

Switch type

Managed

Switch layer

L2+/L3

Quality of Service (QoS) support

Yes

Web-based management

Yes

Cloud-managed

Yes

Traffic classification

Yes

Traffic shaping

Yes

ARP inspection

Yes

Configuring Location Settings (CLI)

Yes

System event log

Yes

Ports & interfaces

Basic switching RJ-45 Ethernet ports quantity

48

Basic switching RJ-45 Ethernet ports type

Gigabit Ethernet (10/100/1000)

SFP+ module slots quantity

4

Network

Networking standards

IEEE 802.1D, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z

10G support

Yes

VLAN support

Yes

Data transmission

Switching capacity

176 Gbit/s

Forwarding rate

130.9 Mpps

MAC address table

16000 entries

Jumbo frames support

Yes

Packet buffer memory

1.5 MB

Security

DHCP features

DHCP client, DHCP relay

IGMP snooping

Yes

Multicast features

Multicast support

Yes

Design

Rack mounting

Yes

Performance

Internal memory

512 MB

Flash memory

32 MB

Mean time between failures (MTBF)

919583 h

Power

Power source

AC

Power supply included

Yes

AC input voltage

100 - 240 V

AC input frequency

50/60 Hz

Power consumption (typical)

24.7 W

Power consumption (max)

45.6 W

Power protection features

Surge protection

Power over Ethernet (PoE)

Power over Ethernet (PoE)

No

Operational conditions

Operating temperature (T-T)

-20 - 50 °C

Storage temperature (T-T)

-40 - 70 °C

Operating relative humidity (H-H)

10 - 90%

Heat dissipation

155.594 BTU/h

Weight & dimensions

Width

440 mm

Depth

270 mm

Height

43 mm

Weight

3.7 kg

Packaging content

Cables included

AC

Rack mount kit

Yes