HDMI OVER CAT6 EXTENDER KIT/ WALLPLATE TRANSMITTER AND RECEIV

Introduction

HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
This complete wall-plate-style transmitter and dual-output receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and displays are farther apart than conventional A/V cables allow. Both the transmitter and receiver have a single-gang metal wall plate design with a metal back cover and blend perfectly into the room décor.

Extends a 4K A/V Transmission up to 230 ft....or More
The B127A-2A1-FHFH extends 4K signals from an HDMI source device to two HDMI displays up to 230 feet away via user-supplied Cat6 cabling. Bi-directional IR remote control lets you operate the source from the display end of the installation. By adding a Tripp Lite B127A-010-H HDMI repeater (sold separately) to the application, you can extend the signal up to 400 feet.
Multi-Resolution Support Allows Mixing and Matching of Displays of Different Resolutions
Say you have a brand new 4K (at 60 Hz) HDTV in the living room, but want to also connect your Blu-ray player or satellite box to the older 1080p TV in the bedroom. The B127A-2A1-FHFH is backward compatible with 4K (at 30 Hz) and 1080p (at 60 Hz) resolutions. This allows each connected television to display video at its maximum resolution.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-2A1-FHFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization automatically fine-tunes the image quality at the remote display.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
After you connect the included external power supply to either the transmitter or receiver, Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place one unit where needed without worrying about finding a nearby AC outlet.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the receiver to the displays with user-supplied HDMI cables. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series).

TAA-Compliant for GSA Schedule Purchases
The B127A-2A1-FHFH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Features

Type

AV transmitter

Maximum resolution

3840 x 2160 pixels

Cable types supported

Cat5,Cat6

Maximum transfer distance

70 m

Maximum refresh rate

60 Hz

Audio system

Multichannel

Extended display identification data (EDID)

Y

Audio output channels

7.1 channels

LED indicators

Y

Supported video modes

3840p

Supported graphics resolutions

3840 x 2160

Cable length

1.38 m

Material

Metal

Colour depth

36 bit

3D

Y

Consumer Electronics Control (CEC) support

Y

Wall mountable

Y

Product colour

White

Certification

CE, FCC, CCC, GS, TUV, UL, cUL, REACH,RoHS

Ports & interfaces

Connectivity technology

Wired

RJ-45 input ports

1

RJ-45 output ports

1

Number of HDMI outputs

2

Digital audio optical out

1

Remote (IR) input

1

Remote (IR) output

1

DC-in jack

Y

Power

AC input voltage

100 - 240 V

AC input frequency

50/60 Hz

Operating voltage

24 V

Input current

0.6 A

Output current

1 A

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-15 - 50 °C

Operating relative humidity (H-H)

0 - 85%

Weight & dimensions

Receiver dimensions (WxDxH)

70 x 34 x 115 mm

Receiver weight

453.6 g

Transmitter dimensions (WxDxH)

70 x 34 x 115 mm

Transmitter weight

453.6 g

Packaging data

Package width

260.1 mm

Package depth

164.1 mm

Package height

55.1 mm

Package weight

450 g

Packaging content

AC adapter included

Y

Included power plug types

AU,EU,NA,UK

Manual

Y

Mounting kit

Y

Technical details

Country of origin

Taiwan

Sustainability compliance

Y

Sustainability certificates

CE, REACH, RoHS

Logistics data

Master (outer) case width

573 mm

Master (outer) case length

273 mm

Master (outer) case height

175 mm

Master (outer) case gross weight

7.9 kg

Products per master (outer) case

10 pc(s)

Master (outer) case GTIN (EAN/UPC)

10037332261035