Smart-UPS RT 5KVA 230V

Introduction

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

ECO Mode

Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

LCD Status Display

Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Cold-start capable

Provides temporary battery power when the utility power is out.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Input Power Factor Correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

SmartSlot

Customize UPS capabilities with management cards.

Network manageable

Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

Serial connectivity

Provides management of the UPS via a serial port.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

LED status indicators

Quickly understand unit and power status with visual indicators.

Features

UPS topology

Double-conversion (Online)

Output power capacity

5 kVA

Output power

5000 W

Waveform

Sine

Input operation voltage (min)

100 V

Input operation voltage (max)

285 V

Input frequency

40/70 Hz

Output operation voltage (min)

220 V

Output operation voltage (max)

240 V

Output frequency

50/60 Hz

Surge energy rating

600 J

Crest factor

3:1

ECO mode

Y

Emergency Power Off (EPO)

Y

Output voltage Total Harmonic Distortion (THD)

2%

Noise level

55 dB

Audible alarm(s)

Y

Audible alarm modes

Alarm when on battery, Low battery alarm, Overload alarm

Ports & interfaces

AC outlet types

C13 coupler, C19 coupler

AC outlets quantity

3 AC outlet(s)

USB port

Y

Serial interface

Y

Ethernet LAN (RJ-45) ports

1

Emergency Power Off (EPO) connector

Y

SmartSlot

Y

Battery

Battery technology

Sealed Lead Acid (VRLA)

Battery voltage

96 V

Battery life (max)

5 year(s)

Battery recharge time

4 h

Hot-swap battery

Y

Automatic battery test

Y

Cold start

Y

Design

Form factor

Compact

Product colour

Black

Display type

LCD

LED indicators

Y

International Protection (IP) code

IP20

Certification

CE, EN/IEC 62040-1

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-15 - 45 °C

Operating relative humidity (H-H)

0 - 95%

Storage relative humidity (H-H)

0 - 95%

Operating altitude

0 - 2011 m

Non-operating altitude

0 - 15240 m

Weight & dimensions

Width

440 mm

Depth

620 mm

Height

178 mm

Weight

51.9 kg

Package width

590 mm

Package depth

790 mm

Package height

275 mm

Package weight

59 kg