+44 (0)1392 64 00 20
D-LINK
Switch Dms-105e 5-port Multi-gigabit Unmanaged

Switch Dms-105e 5-port Multi-gigabit Unmanaged

Part Number:
DMS-105/E
Language:
IN

£74.80  (Excl VAT)

Introduction

Plug-and-play to enjoy fast connectivity
The DMS-105 5-Port Multi-Gigabit Unmanaged Switch offers five multi-Gigabit LAN ports for high-speed to meet your high-performance expectations. The Gigabit ports are ready for Wi-Fi 6, providing unlimited speed and performance. DMS-105 also supports IEEE 802.3az Energy-Efficient Ethernet (EEE), which can reduce power consumption and optimize usage. Without complex installation steps, plug-and-play is convenient and easy for every usage scenario.

Silent Operation
The DMS-105 owns a metal out case with a fanless design which can improve heat dissipation and allows noise-free operation in the working area. All the high-quality designs enhance its durability and are ideally suited for Small Office Home Office (SOHO) environments.

Integrated Networking
The auto-sensing ports of DMS-105 flexibly build an integrated workgroup network. Through the auto-negotiation feature, these ports will detect the network speed and allow you to get the maximum speed possible for each device.

Traffic Management
The traffic management of DMS-105 includes IEEE 802.1p Quality of Service (QoS) and IEEE 802.3x Flow Control. The 802.1p QoS feature classified the traffic into 8 priority levels and prioritized by their importance. As for Flow Control, it will temporarily stop data transmission when the switch’s input buffer is full, helping to minimize dropped packets. The traffic management features provide a more reliable connection for
all your devices.

Green Technology
Under the concept of Eco-friendly, the DMS-105 switch features green technology, such as IEEE 802.3az Energy-Efficient Ethernet (EEE) and link status detection. While the network utilization is low, Energy-Efficient Ethernet can efficiently reduce the switch's power consumption, bringing down the cost in the inactivity duration. Also, the power-saving mode automatically powers down the ports when no link is detected. The link status detection function will effectively save energy and costs.

Simplified Installation
All the ports on the DMS-105 support automatic MDI/MDIX crossover without any cables.
Each port connects the server, hub, router, or switch easily just by plugging in the cable.
Besides, the DMS-105 ports feature LED indicators. With the indicators, you can easily distinguish link status.

Management features

Switch type

Unmanaged

Quality of Service (QoS) support

Y

Switch layer

L2

Ports & interfaces

Basic switching RJ-45 Ethernet ports quantity

5

Basic switching RJ-45 Ethernet ports type

2.5G Ethernet (100/1000/2500)

2.5G Ethernet (copper) ports quantity

5

Network

Networking standards

IEEE 802.1p, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x

10G support

No

Flow control support

Yes

Auto MDI/MDI-X

Yes

MAC address auto-learning supported

Yes

Data transmission

Forwarding rate

18.6 Mpps

Store-and-forward

Yes

Switching capacity

25 Gbit/s

MAC address table

4000 entries

Packet buffer memory

8.1 MB

Security

IGMP snooping

Yes

Multicast features

Multicast support

Yes

Performance

Fanless

Yes

Mean time between failures (MTBF)

765190 h

Design

Stackable

Y

Product colour

Black

LED indicators

Y

Power

Power source

DC

Power supply included

Y

DC input voltage

12 V

Input current

1 A

Power consumption (typical)

4.9 W

Power over Ethernet (PoE)

Power over Ethernet (PoE)

No

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-10 - 70 °C

Operating relative humidity (H-H)

10 - 90%

Storage relative humidity (H-H)

5 - 90%

Heat dissipation

16.78 BTU/h

Sustainability

Sustainability compliance

Yes

Weight & dimensions

Width

100.5 mm

Depth

82 mm

Height

28 mm

Weight

238.6 g

Technical details

Compliance certificates

BSMI, CE, Low Voltage Directive (LVD), RoHS

No options for this product
.