+44 (0)1392 64 00 20
ALLIED TELESIS
Desktop Mini Media Converter - 1000TX to 1000SX LC Connector

Desktop Mini Media Converter - 1000TX to 1000SX LC Connector

Part Number:
AT-DMC1000/LC-50
Language:
IN

£126.06  (Excl VAT)

Introduction

DMC Series

Gigabit Desktop USB-Powered Media Converters
The Allied Telesis DMC Series of Gigabit mini media converters are among the smallest media converters in the market today.

Overview
At just 1.25 inches wide 3.6 inches deep 0.85 inches high, Allied Telesis DMC Series media converters can easily fit into the palm of a hand. In addition to being compact-with a small carbon footprint-the DMC Series can also be powered with the included Micro USB to USB cable, and plugged directly into a laptop or PC or may also be powered via the optional AC/DC adapter. This saves installation time and cabling as there are no further power requirements.

Fiber Connections
The Allied Telesis range of Gigabit media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting SC, ST and LC fiber connectors, these converters can be used to extend networks with up to 500m of multi-mode fiber.

VLAN Support
Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send data packets on the network. DMC Series media converters are fully compatible with

Smart MissingLink (SML)
The Smart MissingLinkT (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime.

Simple Installation
All Allied Telesis media converters feature auto MDI/MDI-X, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of the fiber connection, by forcing the converters to communicate over the fiber cable. This Link Test feature allows installers to check for cable faults without the need for expensive fiber-optic test equipment.

Smart Link Restoration
Smart Link Restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them.

Power Saving
The DMC Series continues the Allied Telesis commitment to the environment with over 50% power savings. With just 1.5W of power usage, DMC Series media converters are some of the most efficient in the market today. these packets, enabling them to be used in modern networks.

Specifications


Network
Fiber optic connectorLC
Packet forwarding rate (100 Mbps)148800 pps
Packet forwarding rate (10 Mbps)1488000 pps
Packet forwarding rate (1 Gbps)14880 pps
Rate limitingYes
Cable types supportedFiber
Converter input interface1000Base-T
Ethernet LAN data rates1000 Mbit/s
Duplex systemFull,Half
Converter output interface1000Base-SX
Auto MDI/MDI-XYes
Maximum data transfer rate1000 Mbit/s
Technical details
Wavelength850 nm
Maximum transfer distance550 m
Fiber mode structureMulti-mode
InternalNo
Ports & interfaces
Fiber optic connectorLC
DC-in jackYes
Performance
Wavelength850 nm
Maximum transfer distance550 m
Fiber mode structureMulti-mode
Design
InternalNo
Weight & dimensions
Width31.8 mm
Depth91.4 mm
Weight113.39 g
Height21.6 mm
Operational conditions
Operating temperature (T-T)0 - 40 C
Storage temperature (T-T)-15 - 65 C
Operating relative humidity (H-H)5 - 95%
Storage relative humidity (H-H)5 - 95%
Operating altitude0 - 3048 m
Packaging content
AC adapter includedYes
No options for this product
.