Hard Drive 6TB SATA 6G Midline 7.2K LFF (3.5in) Low Profile 1 Year Wty 512e (861742-B21)

Introduction

What if you could deploy 100 Gb transceiver connections with an overall reduction of cost per bit? The HPE 100Gb QSFP28 Transceiver is designed to meet the increasing demand of growing bandwidth in the data center. The 100 Gb performance allows a reduction of the port density and number of hardware components required to achieve this higher speed. With reduction of cost per bit, The HPE 100Gb QSFP28 Transceiver can significantly reduce Capex and Opex spending on interconnect connections. When the fiber optic cable is attached via a standard MPO connector, up to 100m connection can be conducted via multi-mode fibers.

Features

- The HPE 100Gb QSFP28 MPO SR4 100m Transceiver has four optical lanes in each direction, allowing each to operate at 25 Gb.
- MPO connector for plugging in multi-mode fiber cables.
- Maximum link length of 70 m on OM3 and 100 m on OM4 multimode fiber at 100 Gb/s.
- Bit-error Rate (BER) lower than 10-15.
- 3.3 V power supply.

Performance

SFP transceiver type

Fiber optic

Maximum data transfer rate

100000 Mbit/s

Interface type

QSFP28

Multi-mode fiber (MMF) supported

Y

Fiber optic connector

MPO

SFP transceiver standard

SR4

Maximum transfer distance

100 m

Wavelength

850 nm

Power

Power consumption (typical)

3.5 W

Operational conditions

Operating temperature (T-T)

0 - 70 °C

Storage temperature (T-T)

-40 - 85 °C

Operating relative humidity (H-H)

0 - 85%

Weight & dimensions

Width

72.7 mm

Depth

8.5 mm

Height

18.4 mm

Weight

36.3 g