Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Allows additional run time to be quickly added as needed.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Provides management of the UPS via a serial port.
LED status indicators
Quickly understand unit and power status with visual indicators.
Provides remote power management of the UPS over the network.
Customize UPS capabilities with management cards.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Provides notification of changing utility power and UPS power conditions
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry's most rigorous standards.
Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Save time with easy and convenient remote accessibility.
Network manageable via serial, USB or optional Ethernet. Includes PowerchuteŽ Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
|Output power capacity||1500 VA|
|Output power||1350 W|
|Input operation voltage (min)||220 V|
|Input operation voltage (max)||240 V|
|Output operation voltage (min)||220 V|
|Output operation voltage (max)||240 V|
|Power supply input frequency||40/70|
|Surge energy rating||340 J|
|Emergency Power Off (EPO)||Yes|
|AC outlet types||C13 coupler|
|AC outlets quantity||8 AC outlet(s)|
|Serial interface type||RJ-45|
|Serial ports quantity||1|
|Ethernet LAN (RJ-45) ports||1|
|Battery technology||Lithium-Ion (Li-Ion)|
|Battery recharge time||6 h|
|Automatic battery test||Yes|
|Battery life (max)||10 year(s)|
|Colour of product||Black, Grey|
|International Protection (IP) code||IP20|
|UPS topology||Double-conversion (Online)|
|Noise level||50 dB|
|Input connections||IEC-320 C14|
|Output connections||IEC-320 C13|
|Output frequency||50/60 Hz|
|Output voltage||230 V|
|Operating temperature (T-T)||0 - 40 °C|
|Storage temperature (T-T)||-20 - 50 °C|
|Operating relative humidity (H-H)||0 - 95%|
|Storage relative humidity (H-H)||0 - 95%|
|Operating altitude||0 - 3000 m|
|Non-operating altitude||0 - 15000 m|
|Certification||CE, EAC, RCM, VDE|
|Package width||600 mm|
|Package depth||850 mm|
|Package height||445 mm|
|Package weight||37.4 kg|
|Quantity per pallet||6 pc(s)|